We’ll now begin to see how we can solve the problem that occur as a “Drum Error” in Brother Printer. There are two ways through which you can resolve the Brother laser printer drum error, by either resolving it or totally replacing it.
Brother printers have distinct consumables i.e. the toner cartridge and the drum unit. Make sure you substitute merely the drum unit and not the cartridge.
Follow the step by step instructions listed below :
You have finally Solved Brother laser printer drum error. You would now be able to print your desired copies.
A lot of times we’ll get a message that states drum error. To set a new drum or replace a new drum, open up the machine and put up the centre of the cartridge out.
Now you see two devices what you call is the drum and the toner cartridge. To release the toner cartridge from the drum, press the blue tab and lift the toner cartridge out.
Now replace the old drum with the new one and place your initial toner cartridge back. Wait until it clicks. Slide the blue tab over two or three times to clean the corona wire.
Insert the whole unit back in and to reset the drum count on a multi-functional machine such as this, you will click the button clear back. A message pops up and says Replace Drum.
Select 1 for yes. And that’s the easiest way to reset brother printer drum error.
Brother sturdily endorses, that customers use genuine Brother drum units. Each laser printer is designed to perform at a defined room temperatures that are harmonized precisely to each of the specific toner specifications. Every separate component is designed to work with the further to safeguard quality and reliability. Using non-Branded materials may affect the hardware’s performance, print quality and the machine’s consistency. Warranty card is not applicable to any problem or errors caused by the usage of unapproved third party drum units or any toner cartridges.