Epson Printer Error 031008 is the most common error that you can come across while using the Epson machine. You may never have a second thought while considering a premium quality printer like Epson, in comparison no other printer can match its high standards.
Epson workforce 4730 is one of the famous printers in the range but has a common error 031008 which is little problematic. Epson error code 031008 usually occurs due to improper insertion of the ink cartridges or the printheads. Even dust accumulated in any of the printer components can be a cause of the error. You must have observed that this error occurs suddenly in the ongoing printing session. If you are still struggling with the Epson Printer Error Code 031008, then follow the guidelines below to fix the issue.
If in case you don’t amend your ink cartridge immediately when you see a low ink warning, it’ll result in faded or blank printouts. When used with a new cartridge, your printer prepares the print head for the new cartridge, this process is also called as priming. The negative aspect to this is when from time to time the printer pushes too much ink and the surplus ink would spread all over the print head where it ends up jamming the nozzles.
If in case you don’t turn off your printer, and keep it on sleep mode the Ink dry up in the nozzles when you don’t make use of it on a regular basis. Turning off your triggers the machine to run a mini-cleaning cycle and helps the ink flowing all over again. As mentioned beforehand, ink dry up when unused.
Knowing the common causes of clogged printheads can help you take the necessary steps to prevent them from happening. As the old adage goes, prevention is always better than cure.
1. The first thing that you need to configure is your ink cartridges. Main issues that persist is due to low ink cartridges, which is the major cause of printhead or print quality issues. Replace your ink to a new one or refill the ink cartridges to run smoothly on your print qualities.
2. After you open your printer grab your printhead and slide it to the left. Make sure you shut off your printer to avoid any shock or physical damage.
3. If you suspect your printhead is blocked, the first thing to do is print a nozzle check pattern to find out which colors are affected. Select Tools and then click on Print Quality report.
4. If there are any error messages that appear on print quality report those error messages are to be resolved. And then select OK.
5. Next, select Settings in the menu and then click Ok.
6. Now choose tools and click Ok.
7. Now in the tools menu select “Clean Printhead” and then click OK.
It is the printer’s self-cleaning cycle and your printheads are automatically cleaned. This clears most of the blockage and could be run twice or thrice for better results. This method resolves the issue 95%of the times. If you still cannot fix the printheads and the printer still displays an Epson error 031008 you need to replace the cartridges with a new one. Or for any other issue call the Epson Support and follow the guidelines.