[Resolved] Quicken Install Error Code 1603

Did you receive Quicken install error code 1603 on your screen? If so, you should check the Quicken installation. The error signifies that your Quicken software is not installed properly on your system due to which you are facing Quicken 1603 error.

If you are bothered by this error, you can fix it. In this guide, we are bringing you the best and effective solutions that will assist you to eliminate Quicken install error code 1603.

Here, you will read about the causes and signs of the Quicken 1603 error. After detecting the right cause, you can fix the error by following these different methods.

Causes of Quicken 1603 Error

There can be various factors due to which your Quicken software ran into a Quicken 1603 error. It is important to explore or discover other possible causes. A few of them are listed below for your knowledge.

• Due to the corrupt registry on your Windows computer (related to the Quicken software), you can face such errors.
• If the Windows registry does not have a valid entry, it can cause serious issues.
• Presence of virus or other malware attacks, you can encounter Quicken install error code 1603.
• If you have deleted other programs that are associated with Quicken documents then it might cause errors to your Quicken software.
• Your system might not have full access to the folder in which you are installing Quicken.
• It can be a substitute drive to which you are installing Quicken.

These are the possible reasons that may cause a Quicken 1603 error. However, you can resolve this error. But before you move forward let’s know how your computer machine or Quicken software react when injected by this error.

Must Read: Fix Quicken Cloud Sync Not Working Errors?

Signs of Quicken Install Error Code 1603

When you find a Quicken 1603 error on your screen, the Quicken software or your computer may behave inappropriately. There are a number of signs that you may notice while running programs. We are jotting down a few of them.

• Your running program can crash anytime.
• Windows runs very slow and sluggish responding to keyboard or mouse.
• Your computer might get frozen repeatedly.

If you find any of the aforementioned signs or symptoms then it indicates that there is something either with your PC or Quicken software.

Now that you are aware of the causes and symptoms of this error, you can take the actions appropriately. Let’s discover effective troubleshooting methods.

How to Fix Quicken 1603 Error?

To get rid of the error code 1603, you need to verify if this error is due to the incomplete installation or run time error. Here, in this article, we are providing a number of solutions that you can try implementing one by one.

For instance, you can end the task running in the background, delete the old Quicken version, and give full access to the system to install and run Quicken with no interruption.

If these methods do not work then you can move to other ways such as upgrade antivirus programs, update the Windows system, install MS redistributable package, run disk cleanup, reinstall video card drivers, and adjust the web browser settings. Now, let’s understand all these specified methods with a manual procedure.

Method 1: Close the Problematic Programs

Sometimes, the running programs in the background create conflict due to which you may encounter a Quicken 1603 error. To fix this error, you can end the task in the Task Manager. Follow these steps to get more clarity about the steps.

• Use “Ctrl + Alt + Del” keys to open the “Task Manager” on your Windows computer. This will show a list of all the running programs.
• Now, click on the “Processes” tab.
• Then, stop the running programs manually. All you have to do is click the program and hit the “End Process” option.

Note: During this process, you have to observe if you see an error on your screen. Once you detect the program that is causing issues, you can uninstall the program and reinstall the program.

Method 2: Remove the Old Version of Quicken

Since the error is related to Quicken software so we will first try to remove this software from your computer. This is because the old version might not be able to work correctly on your PC. Thus, you should uninstall the Quicken software.

Now, there are users who use a different version of Windows computer, e,g., Windows 7, Windows 8, or Windows 10. Based on your Windows version, you can follow the instructions stated below.

Uninstall Quicken on Windows 10

• Use “Windows + R” keys together on your keyboard. This will bring a “Run” dialogue box.
• Type “Control Panel” in the text field.

• Hit the “Enter” key. This will open the “Control Panel” window.
• Now, go to the “Programs” option.
• Click on the “Programs and Features” option.
• Here, you can find “Quicken” from the list of all programs.
• Once found, click on it and go to the “Uninstall” button located on the top.
• Hit the “Yes” button in order to confirm your actions.
• Then, follow the instructions given on your screen to complete the uninstallation process.

Uninstall Quicken on Windows 8

• Press the “Windows” icon located at the bottom left. Alternatively, you can hover the mouse cursor on the bottom left and click on the “Start” screen.
• Find “Quicken” software from the list of installed apps.
• Then, click right on “Quicken” software. This will place a checkmark on the app.
• Now, hit the “Uninstall” button located in the bottom row.
• Once you reach the “Programs and Features” window, make sure that the application is highlighted.
• Then, click on the “Uninstall” button.

Uninstall Quicken on Windows 7

• Click on the “Start” icon located at the bottom left.
• Click on the “Control Panel”.
• Now, go to the “Programs” option.
• Click on the “Programs and Features” option.
• Here, you can find “Quicken” from the list of all programs.
• Once found, click on it and go to the “Uninstall” button located on the top.
• Hit the “Yes” button in order to confirm your actions.
• Then, follow the instructions given on your screen to complete the uninstallation process.

This is how you can uninstall the software application such as Quicken from your Windows computer. Once the software is removed, you can restart your computer. Thereafter, you can verify if the error persists. In case you still find Quicken install error code 1603 then you can move to the next method.

Method 3: Allow Permission to Your System Account

If you do not have full access to your system, there are chances that you won’t be able to install Quicken properly. Therefore, in this method, you are required to grant full permission to your computer account. To be more clear, pursue these steps mentioned below:

• Open “Windows Explorer” or press the “Ctrl + E” keys together.
• Click right on the drive where you prefer to install Quicken.
• Now, click on the “Properties” option.
• Hit the “Security” option.
• Here, you have to make sure that you find “SYSTEM user account” must locate under the “user names box” or “Group”.

In case you do not find the SYSTEM user account in the box then you should follow these steps mentioned below:

• Click on the “Edit” button.
• Then, click on the “Add” option.
• Now, type “SYSTEM” under the “Enter the objects names to select” box.
• Then, click on the “Check Names” option.
• Hit the “OK” button.

Now, in order to change the permission or give full access, you can do the following:

• Click on the “Edit” button.
• Then, select “SYSTEM” and check that the SYSTEM should have “Full Control”.
• In case the “Full Control” option is not selected then you can check the option to select the permission.
• Once done, click on the “Apply” button.
• Hit the “OK” button.
• Now, switch back to the “Properties” option.
• Click on the “Advanced” option.
• Go to the “Change Permissions” option.
• Now, click on the “SYSTEM” entry under the permission entries.
• Then, click on the “Edit” button.
• In the next window, choose the “Applies to” dropdown.
• Then, click on the “This folder, subfolders, and files” option.
• Hit the “OK” button.

Once you are done following these steps, you should wait for some minutes. Thereafter, you can proceed with the Quicken installation. This time the software should be installed properly.

In case Quicken shows error code 1603 as runtime error then your system is probably running out of space due to which it failed to launch properly. In this scenario, you are required to perform methods for your Windows computer. Discover the methods in the following guide.

Method 4: Update Antivirus Programs

Outdated antivirus programs often cause troubles on your Windows computer or affect other programs to run properly. Therefore, you should check for the latest updates of your antivirus programs. If you find any new update release, you should download and install it on your computer so that it can work effectively.

Method 5: Update Operating System

Windows keeps sending new updates for your PC. If you do not install them, this is possible that you encounter unwanted errors in programs.

Therefore, you should update your Windows in order to avoid Quicken install error code 1603. For that, you can go through the following steps:

• Open the “Settings” app.
• Go to “Update & Security”.
• Click on the ”Check for Updates” option.

This will start looking for new updates for your device. If there is any update available, you can download it immediately. This should fix your problem.

Method 6: Install the Redistributable Package

Quicken install error code 1603 can also appear when the Microsoft Visual C++ package has not been installed completely. Hence, it is important to check and install a fresh copy on your computer. To do so, you can go through the following instructions:

• Firstly, remove the current copy of the Microsoft Visual C++ package. For that, use the “Windows + R” keys together on your keyboard. This will bring a “Run” dialogue box.
• Type “Control Panel” in the text field.
• Hit the “Enter” key. This will open the “Control Panel” window.
• Now, go to the “Programs” option.
• Click on the “Programs and Features” option.
• Here, you can find the “Microsoft Visual C++ package” from the list of all programs.
• Once found, click on it and go to the “Uninstall” button located on the top.
• Hit the “Yes” button in order to confirm your actions.

When you are done pursuing these steps, make sure you reboot your system. Thereafter, you can download the new redistributable package and install it properly on your computer. Once done, run the Quicken program and check if the error persists.

Method 7: Run Disk Cleanup

If you encounter a runtime error, it may happen due to the low space. Thus, it is necessary to free up some space. Here, in this method, we will clean up the disk to remove the temporary files as well as system files. Follow these steps to know the process.

• To delete the temporary files, you can go to the Windows search bar.
• Type “Disk cleanup” in the search bar.
• Choose the “Disk Cleanup” when it appears in the list.
• Pick the drive that you wish to clean.
• Hit the “OK” button.
• Click on the file under the “Files to delete” section.
• Hit the “OK” button.

This will delete the temporary files from our system. Yet you prefer to get some more space then you can delete the system files as well. For that, you can do the following:

• Click on the “Clean up system files” in the “Disk Cleanup”.
• Click on the file that you wish to delete.
• Hit the “OK” button.

These are the steps for removing temporary files and system files. This will get more space on your hard drive. Thereafter, you can try launching Quicken software. This will work perfectly.

Method 8: Reinstall the Graphics Driver

There can be instances that the error is displaying due to the corrupted drivers. In this scenario, you can reinstall the graphics driver using the following steps:

• Open “Device Manager” on your computer.
• Find the graphics driver you delete.
• Then, click right on that video card driver.
• Hit the “Uninstall” button.

After you remove the video card driver from your system, you can restart the computer. Thereafter, you can download and install the correct graphic driver on your system. Make sure the drivers are compatible with your device.

Method 9: Internet Explorer Related Runtime Error

If Quicken 1603 error is associated with the Internet Explorer then you can simply reset the web browser. Besides that, you can disable the script debugging. To do so, you can go through the following steps based on your Windows version:

Reset the Internet Browser on Windows 10 and Windows 8

• Click on the search bar and type “Internet Options”.
• Then, click on the “Advanced” tab.
• Hit the “Reset” button.

Reset the Internet Browser on Windows 7

• Click on the “Start” button.
• Then, select “Control Panel”.
• Go to the “Internet Options” located on the left.
• Click on the “Advanced” tab.
• Select the “Reset” button.

Disable Script Debugging

• Open the “Internet Options”.
• Go to the “Advanced” tab.
• Search for the “Disable script debugging”.
• Place the checkmark for the “Radio” button.
• Remove the check for the “Display a Notification about every Script Error” option.
• Hit the “Apply” button.
• Click the “OK” button.

Once you are done following these steps, you can reboot the computer. This will solve the problems that your web browser was having.

Closing Up

Quicken can show up as Quicken install error code 1603 if the software is not installed properly. However, you can reinstall the software to fix the problem. Here, we have also provided other possible troubleshooting methods through which you can resolve the error.

It includes closing the task running in the background, delete the old Quicken version, give full access to the system, upgrade antivirus programs, update the Windows system, install MS redistributable package, run disk cleanup, reinstall the video card drivers, and adjust the web browser settings.

By using these methods, you will surely get rid of the Quicken 1603 error. Hopefully, you find our guide effective to eliminate the error.

If you are using QuickBooks and facing stubborn errors then you can go through the following guide that you may find helpful.

• How to Fix QuickBooks Errors 179?
• How to Write Off Bad Debt in QuickBooks?